Top Panel - Roland Sonar V-Studio VS-700 Owner's Manual

I. MONITOR MAIN Jacks
These are the main monitor output jacks. They are balanced outputs. They output the signals of the audio driver's
"VS-700 MAIN" port.
MONITOR SUB Jacks
These are sub-monitor output jacks. They provide balanced or unbalanced output. They output the signals of the
audio driver's "VS-700 SUB" port.
J. INPUT 1–8 Jacks
These are eight channels of analog audio input. Both XLR type (balanced) and phone type (balanced or unbalanced)
input jacks are provided. A mic preamp and compressor are provided on each channel. Phantom power is provided
to the XLR jacks (switchable for each channel). The input signals are output directly to the audio driver's "VS-700 IN 1-
2" – "VS-700 IN 7-8" ports.
* The XLR jacks and phone jacks cannot be connected simultaneously.
➔ "Connections to the Analog Jacks" (p. 78)

Top Panel

fig.panel-vs-700r-top.eps
A. ARX Expansion Board Slot
Here you can install an ARX expansion board.
➔ "Installing the ARX Expansion Board" (p. 155)
A
Panel Descriptions
23