Specifying the tracks and buses that can be controlled from the
VS-700 console
The tracks and buses that can be controlled from the VS-700 console will match the tracks and buses that can be
controlled from SONAR's track view or console view. If desired, you can also control all tracks and buses in the project.
1.
On SONAR's "Options" menu, click "Controllers/Surfaces" to open the "Controllers/Surfaces"
dialog.
2.
Under "Control Strips Visible in", select one of the following:
fig.13-2.eps
Track View
Console View
All Strips
Once a change is made, the VS-700C Console is updated immediately.
3.
Click "Close."
Explanation
Control the tracks/buses shown in SONAR's Track view.
Control the tracks/buses shown in SONAR's Console view.
If you want the VS-700C Console to always show all tracks and buses in the project,
regardless if any tracks or buses are hidden in SONAR's Track view or Console view.
CHANNEL STRIP Section
45