Roland Sonar V-Studio VS-700 Owner's Manual page 170

About V-LINK
Settings for SONAR
Insert a MIDI track somewhere other than in the project, and make the following driver settings for the input and
output. Next, turn on
play back V-LINK data in SONAR.
Port
MIDI Input
MIDI Output
Turning the V-LINK ON/OFF
1.
In the left of the panel, press [V-LINK] so the indicator is lighted.
The V-LINK setting will be on.
When the V-LINK button is lighted, you'll be able to carry out video control in keeping with operations performed on
the VS-700C.
When V-LINK is switched on, the Video Control function (p. 168) is turned off, and the [VIDEO CTRL] button
will function on behalf of the V-LINK feature (switching video clips).
2.
Press [V-LINK] again.
The V-LINK button will go out, and the V-LINK setting will be off.
V-LINK Parameters
VS-700C Controller
FR BALL
ACT
X-RAY
VIDEO CTRL
PUNCH
LOOP
SNAP
|>
<|
SET
MAKER
VIEW
JOG
T-BAR
JOYSTIC-Y
LFE SEND
JOYSTIC-X
SHUTTLE
V-LINK
170
the [Input Echo] button of the MIDI track. Once set up this way, you'll be able to record and
V-LINK Control
Image Switching (Clip Switching)
Image Switching (Clip Switching)
Image Switching (Clip Switching)
Image Switching (Clip Switching)
Image Switching (Clip Switching)
Image Switching (Clip Switching)
Image Switching (Clip Switching)
Image Switching (Clip Switching)
Image Switching (Clip Switching)
Image Switching (Clip Switching)
Image Switching (Clip Switching)
Image Switching (Clip Switching)
Video Control, Video Bank Select
Video Control
Video Control, Color Cr Control
Video Control
Video Control, Brightness Control
Video Control, Playback Speed
Mode Switching
Driver
V-LINK (VS-700)
IO MIDI (VS-700)
Transmitted MIDI Message
C0 00
C0 01
C0 02
C0 03
C0 04
C0 05
C0 06
C0 07
C0 08
C0 09
C0 0A
C0 0B
B0 00 00-13
B0 0B 00-7F
B0 47 00-7F
B0 49 00-7F
B0 4A 00-7F
E0 00 00/20 00/40 00/00 10/00 30/00 40/40 40/00 50/00 60/00 70/7F 7F/
F0H 41H 10 00H 51H 12H 10H 00H 00H 01H 6F F7H
F0H 41H 10 00H 51H 12H 10H 00H 00H 00H 70 F7H