Patch Tva Env - Roland Sonar V-Studio VS-700 Owner's Manual

Patch TVA Env

A-Env T1 V-Sens
(TVA Envelope Time 1 Velocity Sensitivity)
This allows keyboard dynamics to affect the Time 1 of the
TVA envelope. If you want Time 1 to be speeded up for
strongly played notes, set this parameter to a positive (+)
value. If you want it to be slowed down, set this to a negative
(-) value.
Value: -63– +63
A-Env T4 V-Sens
(TVA Envelope Time 4 Velocity Sensitivity)
The parameter to use when you want key release speed to
control the Time 4 value of the TVA envelope. If you want
Time 4 to be speeded up for quickly released notes, set this
parameter to a positive (+) value. If you want it to be slowed
down, set this to a negative (-) value.
Value: -63– +63
A-Env Time KF
(TVA Envelope Time Keyfollow)
Use this setting if you want the TVA envelope times (Time 2–
Time 4) to be affected by the keyboard location. Based on the
TVA envelope times for the C4 key (center C), positive (+)
settings will cause notes higher than C4 to have increasingly
shorter times, and negative (-) settings will cause them to
have increasingly longer times. Larger settings will produce
greater change.
Value: -100, -90, -80, -70, -60, -50, -40, -30, -20, -10, 0,
+10, +20, +30, +40, +50, +60, +70, +80, +90, +100
fig.06-031.e
Time
C1 C2 C3 C4
-100
-50
0
+50
+100
Key
C5 C6 C7
A-Env Time 1–4 (TVA Envelope Time 1–4) ★
Specify the TVA envelope times (Time 1– Time 4). Higher
settings will lengthen the time until the next volume level is
reached. (For example, Time 2 is the time over which Level 1
will change to Level 2.)
Value: 0–127
A-Env Level 1–3 (TVA Envelope Level 1–3)
Specify the TVA envelope levels (Level 1–Level 3). These
settings specify how the volume will change at each point,
relative to the standard volume (the Tone Level value
specified in the TVA screen).
Value: 0–127
fig.06-041.e
T1 T2 T3
Level
L2
L1
Note on
T: Time L: Level
Creating a Patch
T4
Time
L3
Note off
115