Modifying Pitch (Pch/Pch Env); Rhythm Pitch; Tone Random Pitch Depth - Roland Sonar V-Studio VS-700 Owner's Manual

Velo Range Upper (Velocity Range Upper)
This sets the highest velocity at which the waveform will
sound. Make these settings when you want different
waveforms to sound in response to notes played at different
strengths.
Value: LOWER–127
If you attempt to set the Lower velocity limit above the
Upper, or the Upper below the Lower, the other value
will automatically be adjusted to the same setting.
Velo Fade Upper (Velocity Fade Width Upper)
This determines what will happen to the tone's level when
the tone is played at a velocity greater than its specified
velocity range. Higher settings produce a more gradual
change in volume. If you want notes played outside the
specified key velocity range to not be sounded at all, set this
to "0."
Value: 0–127
fig.06-028.e
Level
Fade Lower
Range Lower
Velocity
Fade Upper
Range Upper

Modifying Pitch (PCH/PCH Env)

Rhythm Pitch

Tone Coarse Tune (Rhythm Tone Coarse Tune)
Selects the pitch at which a rhythm tone sounds.
Value: C-1– G9
Set the coarse tuning for Waves comprising the rhythm
tones with the Wave Coarse Tune parameter (p. 127).
Tone Fine Tune (Rhythm Tone Fine Tune)
Adjusts the pitch of the rhythm tone's sound up or down in
1-cent steps (+/-50 cents).
Value: -50– +50
One cent is 1/100th of a semitone.
Set the fine tuning for Waves comprising the rhythm
tones with the Wave Fine Tune parameter (p. 127).

Tone Random Pitch Depth

This specifies the width of random pitch deviation that will
occur each time a key is pressed. If you do not want the pitch
to change randomly, set this to "0." These values are in units
of cents (1/100th of a semitone).
Value: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 20, 30, 40, 50, 60, 70, 80,
90, 100, 200, 300, 400, 500, 600, 700, 800, 900,
1000, 1100, 1200
Creating a Rhythm Set
129