System Settings; Functions Of System Parameters; System Midi; System Sound - Roland Sonar V-Studio VS-700 Owner's Manual

System Settings

Settings that affect the entire operating environment of the Fantom VS, such as tuning and MIDI message reception, are referred to as
system functions. This section explains how to make settings for the System functions and describes the functions of the different
System parameters.

Functions of System Parameters

This section explains what the different System parameters do, and also how these parameters are organized.

System MIDI

Parameter
Rx Program Change
(Receive Program Change Switch)
Rx Bank Select
(Receive Bank Select Switch)

System Sound

Parameter
Master Tune
Master Level
Master Key Shift
Patch Remain
(Patch Remain Switch)
Value Description
OFF, ON Specifies whether Program Change messages will be received (ON) or not (OFF).
OFF, ON Specifies whether Bank Select messages will be received (ON) or not (OFF).
Value Description
Adjusts the overall tuning of the Fantom VS. The display shows the frequency of the
415.3–466.2 Hz
A4 note (center A).
0–127 Adjusts the volume of the entire Fantom VS.
-24– +24 Shifts the overall pitch of the Fantom VS in semitone steps.
Specifies whether currently sounding notes will continue sounding when another
patch or rhythm set is selected (ON), or not (OFF).
Also, when this is "ON," changes produced by incoming MIDI messages such as
Volume or Pan (CC 5, 7, 10, 65, 68, 71–74, RPN 0, 1, 2, MONO ON, POLY ON), as well as
tonal quality and volume changes produced by the various controllers will be
inherited.
OFF, ON
Effects settings change as soon as you switch to a new patch or rhythm
set, without being influenced by the Patch Remain setting. Because of
this, certain effects settings can cause notes that were until then
sounding to no longer be heard, even though Patch Remain has been
set to on.
151