Track Solo (SOLO)
Use the [SOLO] button to solo/unsolo the assigned track or bus. When the channel is soloed, the [SOLO] button is lit.
When one or more channels are soloed, the [Rude SOLO] button is lit as a convenient reminder. You can press the
[Rude SOLO] button to quickly unsolo all channels. For more information about Rude SOLO, refer to "Rude MUTE/
Rude SOLO/Rude ARM Buttons" (p. 40).
The modifier buttons (p. 67) can be used to extend the functions as follows.
FADER VIEW mode
TRACK
BUS
MAIN
Track Arm (ARM)
Use the [ARM] button to arm the track for recording. When the track is armed for recording, the [ARM] button is lit.
When one or more channels are armed for recording, the [Rude ARM] button is lit as a convenient reminder. You can
press the [Rude ARM] button to quickly disarm all tracks. For more information about Rude ARM, refer to "Rude
MUTE/Rude SOLO/Rude ARM Buttons" (p. 40).
The modifier buttons (p. 67) can be used to extend the functions as follows.
FADER VIEW mode
TRACK
BUS
MAIN
SOLO
Solo/unsolo
Solo/unsolo
(Reserved)
ARM
Arm for recording
(Reserved)
(Reserved)
CHANNEL STRIP Section
SHIFT + SOLO
Enable/Disable Solo Override
(Reserved)
(Reserved)
35