Surround Section - Roland Sonar V-Studio VS-700 Owner's Manual

SURROUND Section

The SURROUND section lets you control surround bus parameters on the selected channel strip.
fig.34.eps
A
A. Surround joystick panner (Angle and Focus)
B. [LFE SEND] Level knob (or FR-Balance when [SHIFT] button is pressed)
C. [VIEW] button (open surround panner in SONAR)
D. [V-LINK] button
The SURROUND section contains the following controls.
Interface
Surround joystick panner
LFE SEND
VIEW
V-LINK
You can also use the T-Bar to control Front/Rear-Balance (refer to "T-Bar Section" (p. 69)).
You can move the active window in SONAR by holding down the [COMMAND] modifier button and moving the Surround
Panner (move the joystick until it "catches" the window).
68
B C
Explanation
Controls the Surround Panner of the selected channel strip. The joystick X-Y position
simultaneously controls the Angle and Focus parameters in SONAR. When controlling
non-surround channels, the X axis controls pan.
Adjusts value of LFE Send on the selected channel strip's surround panner. To control
FRBalance (Front/Rear), hold down the SHIFT modifier while you adjust the LFE SEND
knob.
Opens the Surround Panner window in SONAR.
Enables the V-Link protocol. (p. 169)
D