Removing An Expansion Board - Roland Sonar V-Studio VS-700 Owner's Manual

Installing the ARX Expansion Board

Removing an Expansion Board

To remove an expansion board, reverse the process by which you inserted it.
1.
Unlatch the latched board holders.
fig.attach08.eps
2.
Verify that the two latched board holders are unlocked, then gently pull up the board and
disconnect the connector.
fig.attach09.eps
3.
Disengage the board from the non-latched board holders, and remove the board.
4.
Attach the cover by reversing step 2 of the installation process.
158