CHANNEL STRIP CONTROL Section (EQ, SEND and ACT)
SEND Mode
In SEND mode, there are different parameters of control for stereo and surround buses.
SEND mode lets you control AUX SEND parameters for the selected channel strip.
To Enable SEND Mode
Press the [SEND] button. The [SEND] button is lit when enabled.
You can specify four SEND levels for an audio track. For a MIDI track, you can specify the reverb and chorus sends.
fig.26.eps
Audio tracks
A. Send level
B. Send pan/angle
C. Pre/post toggle (press)
D. Send enable
E. Reverb level
F. Chorus level
52
MIDI tracks
A
B
C
D
E
F