System Settings; Basic Procedure For System Settings - Roland 5100011346 -01 Owner's Manual

System Settings

Here you can make "system" settings that apply to the overall operation of the SD-50, such as the tuning and the
brightness of the display.

Basic Procedure for System Settings

1.
Press the [MENU] button.
The menu screen will appear.
menu-1.eps
2.
Turn the [VALUE] dial to select the parameter that you want to edit, and then press the [ENTER]
button.
The value of the selected parameter will be highlighted.
menu-2.eps
3.
Turn the [VALUE] dial to edit the value, and then press the [ENTER] button.
4.
When you've finished making settings, press the [MENU] button.
The following message will appear.
fig.screen.eps
If you decide to cancel, press [EXIT].
5.
If you decide to execute, press the [ENTER] button.
When the settings have been written, the following screen will appear, and then you'll return to the menu screen.
menu-3.eps
72