Table of Contents
Advertisement
Set the GC column parameters
Figure 10 GC columns parameters
Agilent G1701EA MSD Productivity ChemStation Familiarization Guide
Select the Columns button,
1
are displayed.
Check the Column information in the Selection list.
2
•
Column: 19091S-433 (HP-5ms 30 m x 250 µm x 0.25 µm)
•
In: front or back (split/splitless inlet position)
•
Out: Vacuum
Mark the Control Mode checkbox.
3
In the Flow Setpoint field, enter 1.0 mL/min. The Pressure,
4
Average Velocity, and Holdup Time Setpoints will be calculated
and displayed in the corresponding fields.
In the dropdown list, select Constant Flow.
5
In the Post Run field, enter 1.0 mL/min.
6
Select Apply to download these settings to the GC.
7
Create a Method for Qualitative Analysis
. The Column parameters
3
35
Advertisement
Table of Contents
