Table of Contents
Advertisement
3
Create a Method for Qualitative Analysis
28
In the Method Comments field, enter a description of this
4
method.
Mark the Save Copy of Method With Data checkbox. When the
5
ChemStation acquires sample data using this method, it
automatically saves a copy of the method along with the
data.
In the Method Sections To Run area, mark the Data Acquisition
6
checkbox only. The data analysis will not be run at this time.
Select OK to close the Method Information dialog box and
7
display the Inlet and Injection Parameters dialog box.
From the Sample Inlet dropdown list, select GC.
8
From the Injection Source dropdown list, select your source.
9
•
If you are injecting from the GC using the Automatic
Liquid Sampler (ALS), select GC ALS.
•
If you are manually injecting or using another injection
source, select Manual.
Mark the Use MS checkbox to allow the ChemStation to turn
10
on the MS analyzer and save the MS sample data acquired
during the run. You would only uncheck this box when you
have a GC (non-MS) detector and you were acquiring data
for the GC detector only.
In the Inlet Location area, select the location where your S/SL
11
inlet is attached to the MS through the column.
In the MS Connected to area, select the location where your
12
S/SL inlet is attached to the MS through the column.
Select OK to close the Inlet and Injection Parameters dialog box
13
and display the GC Edit Parameters window.
Agilent G1701EA MSD Productivity ChemStation Familiarization Guide
Advertisement
Table of Contents
