Run Autotune
Agilent G1701EA MSD Productivity ChemStation Familiarization Guide
From the Instrument Control window select Instrument > Tune
1
MSD... to display the Select Tune Type dialog box.
Select Tune MSD and click OK to close the dialog box and
2
start the autotune procedure.
The system uses the PFTBA (perfluorotributylamine)
calibrator to tune the instrument. When the tune is
complete, the mass 69, 219, and 502 profile scans are
displayed with abundance and peak widths noted. See
Figure
1. The tune report is also generated as shown in
Figure 2
on page 21.
2
Tune the MS
19