Table of Contents
Advertisement
3
Create a Method for Qualitative Analysis
Set the GC injector parameters
38
If you are not using the autosampler, skip this section.
Select the ALS button,
1
Select the Front Injector or Back Injector tab, depending on
2
your hardware configuration.
In the Injection area:
3
Verify that the Syringe Size matches your hardware
a
configuration.
In the Injection Volume field, enter
b
In the Washes and Pumps area:
4
For Solvent A Washes, enter
a
For Sample Washes, enter
b
For Sample Pumps, enter
c
Select the Advanced button,
5
options are displayed in the window.
In the Plunger Speed area, select Fast.
6
In the Sampling Depth area,
7
Mark the Enable checkbox.
a
In the field, enter
b
Select Apply.
8
Agilent G1701EA MSD Productivity ChemStation Familiarization Guide
.
1
.
5
in the PostInj field.
3
in the PreInj field.
5
in the PreInj field.
. Additional
3.6
.
Advertisement
Table of Contents
