4
Run the Scan Method
Prepare the Sample
56
Fill a sample vial with the contents of the 10 ng/mL 5975
1
MSD Sample (P/N 05970-60045 or P/N 5074-3025 Japan
only) and cap the vial.
If you are not using an ALS skip the remaining steps.
Place the sample vial into position 1 of the GC sample tray.
2
Fill a solvent wash vial with isooctane and place it in
3
injector turret location A for solvent wash mode A, B.
Place a waste vial in turret location B specified for solvent
4
wash mode A, B.
Agilent G1701EA MSD Productivity ChemStation Familiarization Guide