Table of Contents
Advertisement
Agilent G1701EA MSD Productivity ChemStation Familiarization Guide
Select the Mass Range tab and note the asterisk.
5
The asterisk in the Summary Of Settings table, (Scans/Sec*)
denotes that the Scans/Sec displayed here does not
represent the actual cycles. See
Frequency"
on page 98, for more information.
6
Write down the cycle frequency for the scan mode.
Select Close to return to the MS SIM/Scan Parameters dialog
7
box.
From the Acq. Mode dropdown box, select SIM.
8
Select SIM Parameters. The Edit SIM Parameters dialog box
9
opens where we can view our previous settings.
Select the Mass Range tab and write down the cycle
10
frequency for the SIM mode.
Select Close to return to the MS SIM/Scan Parameters dialog
11
box.
Select OK to save the parameters and close the dialog box.
12
Save the method with the name sim_scan.M.
13
The individual cycle frequencies recorded here will be used to
calculate the actual cycle frequency in the next section
"SIM/Scan Mode Cycle Frequency"
Create a SIM Quantitation Method
"SIM/Scan Mode Cycle
on page 98.
6
97
Advertisement
Table of Contents
