Agilent Technologies G1701EA Familiarization Manual page 118

8
Set Up a Quantitation Database
Figure 45 The completed quant database
118
Select Do Update. The Edit Compounds dialog box opens and
6
displays the new calibration point.
Select the Identification tab.
7
In the Quantitation area, select:
8
Identify by - All Hits
a
Subtraction Method - Avg first & last
b
9 Continue with the above steps under
5, 10, 25, and 50 to the calibration curve"
concentration levels are added. The completed calibration
curve is shown in
Select OK to close the window.
10
Agilent G1701EA MSD Productivity ChemStation Familiarization Guide
"Add calibrator levels
Figure 45.
until all