Edit The Integration Events - Agilent Technologies G1701EA Familiarization Manual

Edit the integration events

Agilent G1701EA MSD Productivity ChemStation Familiarization Guide
When the data analysis part of your method is run, the
chromatogram is integrated using autointegrate. Most of the
chromatogram can be successfully integrated by using the
ChemStation default auto integration parameters. However, you
can customize the auto integration parameters and add
integration events for your specific chromatograms. These
events are saved and used when your method is run.
Select the Integration Parameters button,
1
Integration Events dialog box opens.
This example assumes the ChemStation Integrator is the
specified integrator
To change Initial Area Reject, Initial Peak Width, or Initial
2
Threshold:
Select the parameter you wish to change in the Integrator
a
Event Name list. The parameter is displayed in the Event
field and the current value is displayed in the Value field.
Enter the custom value in the Value field.
b
Select Enter. The custom value is now listed in the Value
c
list.
To change Shoulder Detection:
3
Select Shoulder Detection in the Integrator Event Name list.
a
The parameter is displayed in the Event field and the
current setting is displayed in the Value field.
Select the Value field. An Edit Integration Events
b
confirmation message appears.
Select Yes to change the setting.
c
Qualitative Data Analysis
. The Edit
5
69