Table of Contents
Advertisement
3
Create a Method for Qualitative Analysis
Edit the GC real time plots to display
Edit the MS parameters
42
Figure 15 Selecting GC signals to plot in real time
From the GC Detector Data dialog box, clear the checkboxes
4
for all signals. We will not be plotting GC signals.
Select OK to save the settings and close the dialog box. The
5
MS Tune File dialog box opens. See
Figure 16 Selecting the method MS tune parameter file
Select atune.u from the File list.
1
Select OK to assign the tune file to the current method and
2
close the MS Tune File dialog box. The MS SIM/Scan
Parameters dialog box opens.
In the MS Instrument area enter:
3
In the Solvent Delay field, enter
a
In the EMV mode drop down list, select Gain Factor.
b
In the Gain Factor field, enter
c
Agilent G1701EA MSD Productivity ChemStation Familiarization Guide
Figure
16.
3.00 min
.
1.00
.
Advertisement
Table of Contents
