3
Create a Method for Qualitative Analysis
Set the GC readiness state
Figure 8
Readiness state component selection
32
Select the Readiness button,
1
parameters are displayed.
Select the Oven, SS Inlet (attached to column 1), and Thermal
2
Aux 2 (MSD Transfer Line). These selections require the GC
to wait until all setpoints related to the oven, inlet, and
transfer line are held at a steady value before allowing a run
to begin.
Click Apply to download these selections to the GC.
3
Agilent G1701EA MSD Productivity ChemStation Familiarization Guide
. The Readiness