Table of Contents
Advertisement
In This Guide
Agilent G1701EA MSD Productivity ChemStation Familiarization Guide
This guide contains a step-by-step exercise to help you become
familiar with your Agilent 7890A GC/5975 MSD with G1701EA
MSD Productivity ChemStation software.
To successfully use this book, you need the following:
• GC Inlet:
• Column:
• Sample:
• MSD Tuning
Calibrator:
Before operating your instruments, be sure to read all safety
and regulatory information included with your instruments.
1
Start Up the System
Start up your system hardware and software for data
acquisition.
2
Tune the MS
Determine whether the instrument is correctly tuned.
3
Create a Method for Qualitative Analysis
Create a new qualitative analysis scan method from the system
default method.
4
Run the Scan Method
Run the method created in
5
Qualitative Data Analysis
Use the Enhanced Data Analysis program to analyze the data
generated in
Chapter
6
Create a SIM Quantitation Method
Create a SIM method from the scan method created in
Chapter
3.
7
Run a Sequence
Create and run a sequence using the method created in
Chapter
6.
Split/Splitless Inlet with EPC
(default inlet configuration)
HP-5ms 30 m x 250 µm x 0.25 µm
5975 MSD Sample (P/N 05970-60045) or
(P/N 5074-3025 Japan only)
PFTBA (perfluorotributylamine)
Chapter 3
to acquire sample data.
4.
3
Advertisement
Table of Contents
