Monitoring the inverter
Monitoring of output current or output voltage
output voltage are initially set in the first, second, and third screens, respectively).
mode. [A] indicator turns ON.
• Other item, such as output power or set frequency, can also be monitored. Use Pr.774 Operation panel monitor selection 1 to
Pr.776 Operation panel monitor selection 3 to change the monitor item. (Refer to
4. BASIC OPERATION
4.2 Monitoring the inverter
in the monitor mode to switch the display among three monitoring screens (output frequency, output current, and
during inverter operation to monitor the output frequency. [Hz] indicator turns ON.
to monitor the output current. This operation is valid during running or stopping under any operation
to monitor the output voltage.