Mitsubishi Electric FR-CS84-012 Instruction Manual page 103

• The operation mode can be selected from the operation panel or with the communication instruction code.
External terminal
NOTE
• There is a choice of two settings, "3" and "4", for the External/PU combined operation mode. The startup method differs
according to the setting value.
• The PU stop function (stopping the operation by pressing
in any operation mode as well as in the PU operation mode. (Refer to Pr.75 Reset selection/disconnected PU detection/
PU stop selection on
102
5. PARAMETERS
5.5 (D) Operation command and frequency command
PU operation
mode
Inverter
Operation panel
PU connector
Network
operation mode
External
operation mode
page 85).
Personal
computer
Programmable
Personal
controller
computer
5 6
4
3 7
2
8
1
9
10
Potentiometer Switch
on the operation panel or the parameter unit) is initially enabled