Setting Notes - Siemens 7SC80 Manual

Functions
2.30 Additional Applications with 6 Voltage Inputs
[lo_UVPSide2, 1, en_US]
Figure 2-145
2.30.2.5

Setting Notes

General
The Voltage protection 27, 59 of side 2 function is only effective and accessible if address 155 27/59 S2 is
set to Enabled during configuration of protection functions. If this function is not required, then Disabled
is set.
The voltage to be evaluated is selected in Power System Data 1 (see Section
The Overvoltage protection 59 of side 2 function can be turned ON or OFF, or set to Alarm Only at address
5601 FCT 59 S2.
The Undervoltage protection 27 of side 2 function can be turned ON or OFF or set to Alarm Only at
address 5701 FCT 27 S2.
432
Logic Diagram of the Undervoltage Protection 27 of Side 2 Function
2.30.2.2 Measurement Principle).
SIPROTEC Compact, 7SC80, Manual
E50417-G1140-C486-A8, Edition 07.2017