Recloser Setting Summary; Description; Setting Notes - Siemens 7SC80 Manual

Siprotec compact feeder protection and recloser controller

Hide thumbs Also See for 7SC80:

Table of Contents

Recloser Setting Summary

With the Recloser Setting Summary dialog, you can deploy the 7SC80 device as a recloser control relay.

If the following 3 conditions are met, the function is available:

The 10th number of the MLFB is B, C, or E.

The 15th number of the MLFB is A or B.

The 16th number of the MLFB is 1, 3, 4, or 5.

The Recloser Setting Summary dialog contains all parameters associated of the recloser application. You can

set parameters in the dialog and save your settings, then, DIGSI copies the values of the parameters to the

SIPROTEC standard parameters automatically. There is no need to set parameters in standard dialogs.

The copy is unidirectional. If you change the settings of the standard parameters in standard dialogs, the

values of the related parameters in the Recloser Setting Summary dialog will not be changed.

If you want to set parameters related to a function in the Recloser Setting Summary dialog, you must set the

function to All curve or Enabled as the following table shows in the Functional Scope dialog.

Function Name

79 Auto-Reclose Function

67N, 67N-TOC

Cold Load Pickup

81 Over/Underfrequency

81 Over/Underfrequency Prot.

Trip Single Mode

You can find the Recloser Setting Summary function in all setting groups. The following is an example of the

function in the Setting Group A dialog.

SIPROTEC Compact, 7SC80, Manual

E50417-G1140-C486-A8, Edition 07.2017

You can find related parameters of this function in

the Reclosing tab of the Recloser Setting Summary

You can find related parameters of these 4 functions

in the Overcurrent tab of the Recloser Setting

Summary dialog.

You can find related parameters of these 4 functions

in the Others tab of the Recloser Setting Summary

2.29 Recloser Setting Summary

Show Quick Links

Table of Contents