Siemens 7SC80 Manual page 405

Special Parameters in
Easy Setting GUI View
Number Close Opera-
tions to Lockout Phase
Number Close Opera-
tions to Lockout Gnd.
Trip #1 Phase Curve
Trip #1 Ground Curve
Phase Reclose Interval
1
Ground Reclose
Interval 1
Trip #2 Phase Curve
Trip #2 Ground Curve
Phase Reclose Interval
2
Ground Reclose
Interval 2
SIPROTEC Compact, 7SC80, Manual
E50417-G1140-C486-A8, Edition 07.2017
C Setting Options
0 .. 9
0 .. 9
Fast Curve x
Delayed Curve x
Fast Curve y
Delayed Curve y
Fast Curve x
Delayed Curve x
Fast Curve y
Delayed Curve y
0.01 .. 320.00 sec
0.01 .. 320.00 sec
Fast Curve x
Delayed Curve x
Fast Curve y
Delayed Curve y
Fast Curve x
Delayed Curve x
Fast Curve y
Delayed Curve y
0.01 .. 320.00 sec
0.01 .. 320.00 sec
2.29 Recloser Setting Summary
Default Setting Description
1 This setting will determine
how many close opera-
tions will be executed by
the auto reclose function
before lockout is activated
for phase faults cleared
prior to each close
attempt.
1 This setting will determine
how many close opera-
tions will be executed by
the auto reclose function
before lockout is activated
for ground faults cleared
prior to each close
attempt.
Fast Curve x Select a fast or delayed
curve for the 1st phase
overcurrent trip.
Fast Curve x Select a fast or delayed
curve for the 1st
ground overcurrent
trip.
0.50 sec This setting will determine
the reclose interval time in
the 1st phase
reclose cycle.
0.50 sec This setting will determine
the reclose interval time in
the 1st ground
reclose cycle.
Fast Curve x Select a fast or delayed
curve for the 2nd phase
overcurrent trip.
Fast Curve x Select a fast or delayed
curve for the 2nd
ground overcurrent
trip.
0.50 sec This setting will determine
the reclose interval time in
the 2nd phase
reclose cycle.
0.50 sec This setting will determine
the reclose interval time in
the 2nd ground
reclose cycle.
Functions
405