Task: Create A Project - Siemens Simatic S7-200 System Manual

Getting Started with a Sample Program
4.2

Task: Create a Project

Creating a New Project
When you create or open a project, STEP 7-Micro/WIN starts the Ladder or STL Editor
(OB1), and depending on your selected preference, the Data Block Editor (DB1), the Status
Chart, and the Symbol Table.
To create a new project, select the menu command Project
or click the New Project toolbar button.
The CPU Type dialog box is displayed. Select your CPU type from the drop-down list box.
Project Edit View CPU Debug Tools Setup Window Help Project
New...
Open...
1 c:\microwin\project1.prj
2 c:\microwin\project2.prj
3 c:\microwin\project3.prj
Exit
Figure 4-4
4-6
Ctrl+N
Ctrl+O
CPU Type
Select or read the CPU type from your PLC if you would like the software to
limit the available options to only those supported by a specific CPU.
CPU Type: CPU 212
Creating a New Project and Selecting the CPU Type
New..., as shown in Figure 4-4,
Read CPU Type
Communications...
OK Cancel
S7-200 Programmable Controller System Manual
C79000-G7076-C230-02