Siemens Simatic S7-200 System Manual page 54

Installing and Using the STEP 7-Micro/WIN Software
18. Disconnect your remote modem from your local machine (your programming device or
PC).
19. Connect the remote modem to your S7-200 programmable controller.
20. Connect your local modem to your programming device or PC.
21. Ensure that your setup matches the one shown in the General Information tab of the
Configure Modems dialog box. See also Figure 3-14.
22. When you have finished your setup, click the "OK" button to exit the Communications
dialog box.
23. To connect your modem, select the menu command Setup
Connect dialog box appears. See Figure 3-18.
24. If you did not already enter a phone number in the Connect Phone Number field of the
Local Modem Configuration tab of the Configure Modems dialog box, or if you want to
change the phone number that you entered there, enter the number in the Phone
Number field.
25. Click the "Connect" button. Your modem setup is complete.
STEP 7-Micro/WIN
Project View CPU Setup Help
Figure 3-18 Connect Dialog Box
3-24
Setup
Preferences...
Communications...
Connect Modem...
Connect
Phone Number: xxx-xxxx
Connect
S7-200 Programmable Controller System Manual
Connect Modem.... The
Configure Modems...
Cancel
C79000-G7076-C230-02