Task - Siemens SIMATIC S7-300 Getting Started

Preparation

2.2 Task

● The configuration is completely installed and wired. For information, refer to
● You provided hardware limit switches and EMERGENCY-OFF switches for safe and
2.2 Task
Example configuration
8
Note
For the example of a drive in Getting Started we use a SIMODRIVE 611 universal
training case. This training case is available under the following order number:
• 6ZB2420-0AB00 or
• 6SN1182-0EA00-3DP0 or
• 6AU1700-8AA00-0AA0
Started CPU 31x: Commissioning
reliable operation of the system.
WARNING
Operation of an S7-300 as part of plants or systems is subject to special rules and
regulations, based on its field of application. Please note the current safety regulations
for the prevention of accidents, e.g. IEC 204 (EMERGENCY-OFF equipment). You risk
severe injury, or damage to machines and equipment if you ignore these directives.
.
CPU 317T-2 DP: Controlling a physical axis
Getting Started, 03/2008, A5E00251786-05
Getting