Using The S7-200 Instruction Wizard - Siemens Simatic S7-200 System Manual
Programmable controller
Hide thumbs
Also See for Simatic S7-200:
- System manual (607 pages) ,
- Getting started (65 pages) ,
- Manual (55 pages)
Table of Contents
Advertisement
Additional Features of STEP 7-Micro/WIN
5.2
Using the S7-200 Instruction Wizard
STEP 7-Micro/WIN provides the S7-200 Instruction Wizard, which lets you configure the
following complex operations quickly and easily.
Configure the operation of a PID instruction
Configure the operation of a Network Read or Network Write instruction
Configure a sampling and averaging algorithm (Analog Input Filtering)
Configure the operations of a High-Speed Counter
In Section 5.3, an example of the Analog Input Filtering Wizard is shown.
Selecting the S7-200 Instruction Wizard
To select the S7-200 Instruction Wizard, follow these steps:
1.
Select the menu command Tools
2.
Click on the instruction formula that you want to configure.
3.
Click on "Next>". If you have not compiled your program since the last edit, you must do
so. Since a program compile may take some time (if your program is lengthy), you are
asked if you want to proceed. The message ''Compile Needed. Your program must be
compiled in order to proceed. Compile Now?'' appears. Click on "OK" to compile, or on
"Cancel" to cancel out of the wizard without compiling.
4.
Once you choose an instruction formula and your program has compiled, the specific
formula screens appear.
STEP 7-Micro/WIN - c:\microwin\project1.prj
Project Edit View CPU Debug Tools Setup Window Help
S7-200 Instruction Wizard
This S7-200 Instruction wizard will allow you to configure complex operations
quickly and easily. The Wizard will present you with a series of options for the
formula that you request. Upon completion, the wizard will generate the program
code for the configuration you have chosen.
The following is a list of the instruction formulae that the wizard supports. What
instruction formula would you like to configure?
To begin configuring the formula you have chosen, click Next.
Figure 5-13
Using the S7-200 Instruction Wizard
5-12
Instruction Wizard... as shown in Figure 5-13.
Tools
Tools
Instruction Wizard..
TD 200 Wizard...
Project Services ...
Edit/Add Tools...
PID
NETR/NETW
Analog Input Filtering
HSC
Configure the operation of a PID instruction.
< Prev
Next >
S7-200 Programmable Controller System Manual
C79000-G7076-C230-02
Cancel
Advertisement
Table of Contents
