Siemens Simatic S7-200 System Manual page 99

Programmable controller
Hide thumbs Also See for Simatic S7-200:
Table of Contents

Advertisement

After you have answered all the queries for the chosen formula, you are shown the final
screen of the S7-200 Wizard, as shown in Figure 5-14. This screen explains the program
segments to be generated for the configuration you have chosen. It also allows you to
specify where the code should be placed within the main program.
S7-200 Instruction Wizard (Analog Input Filtering)
Subroutines and Interrupt routines will be placed at the end of your program. Calls
to subroutines must be placed in your main program. To view where the call will be
inserted, choose a position, and press Browse. The program editor will then scroll
to the position you have chosen. When you are satisfied with the position, press
Finish.
After what Network should the code for the main program be inserted?
Figure 5-14
Program Segments Generated by the S7-200 Instruction Wizard
S7-200 Programmable Controller System Manual
C79000-G7076-C230-02
This S7-200 Instruction wizard will now generate code for the configuration you
have chosen, and insert that code in your program. The configuration you have
requested consists of:
One subroutine at SBR 1
Additional Features of STEP 7-Micro/WIN
< Prev
Finish
23
Browse
Cancel
5-13

Advertisement

Table of Contents
loading

Table of Contents