Getting Started With A Sample Program - Siemens Simatic S7-200 System Manual

Getting Started with a Sample Program

The examples and descriptions in this manual support Version 2.1 of STEP 7-Micro/WIN
programming software. Previous versions of the programming software may operate
differently.
This chapter describes how to use the STEP 7-Micro/WIN software to perform the following
tasks:
Entering a sample program for a mixing tank with two supply pumps
Creating a Symbol Table, Status Chart, and Data Block
Monitoring the sample program
STEP 7-Micro/WIN provides extensive online help. Use the Help menu command or press
to obtain the most current information.
F1
Chapter Overview
Section
4.1 Creating a Program for a Sample Application
4.2 Task: Create a Project
4.3 Task: Create a Symbol Table
4.4 Task: Enter the Program in Ladder Logic
4.5 Task: Create a Status Chart
4.6 Task: Download and Monitor the Sample Program
S7-200 Programmable Controller System Manual
C79000-G7076-C230-02
Description
4
Page
4-2
4-6
4-8
4-10
4-14
4-15
4-1