Siemens Simatic S7-200 System Manual page 476
Programmable controller
Hide thumbs
Also See for Simatic S7-200:
- System manual (607 pages) ,
- Getting started (65 pages) ,
- Manual (55 pages)
Table of Contents
Advertisement
Index
Shift Register Bit (SHRB), 10-78
Shift Register Bit (SHRB) box, 10-78
Shift Register Bit instruction, 10-78
Shift Right Byte instruction, 10-80
Shift Right Double Word instruction, 10-81
Shift Right Word instruction, 10-80
Simulator. See Input simulator
Single-phase wiring guidelines, 2-10
Size of the modules
CPU 212, 2-3
CPU 214, 2-3
CPU 215, 2-4
CPU 216, 2-4
expansion I/O modules, 2-4
screw sizes for installation, 2-3–2-5
Slave devices
communications, 9-9
CPU 215 as DP slave, 3-19, 9-15
SM0.2 retentive data lost memory bit, 7-14
SMB0 status bits, D-1
SMB1 status bits, D-2
SMB110-SMB115 standard protocol status,
D-12
SMB186-SMB194 receive message control,
D-10
SMB2 freeport receive character, D-2
character interrupt control, 10-129
SMB28, SMB29 analog adjustment, 8-8, D-5
SMB3 freeport parity error, D-2
character interrupt control, 10-129
SMB30, SMB130 freeport control registers,
10-126, D-6
SMB34/SMB35 time-interval registers, D-7
SMB36-SMB65 HSC register, D-8
SMB4 queue overflow, D-3
SMB5 I/O status, D-3
SMB6 CPU ID register, D-4
SMB66-SMB85 PTO/PWM registers, D-9
SMB7 reserved, D-4
SMB8-SMB21 I/O module ID and error regis-
ters, D-4
SMB86-SMB94 receive message control, D-10
SMW22-SMW26 scan times, D-5
Index-26
Special memory bits, D-1–D-13
addressing, 7-4
SMB0 status bits, D-1
SMB1 status bits, D-2
SMB110-SMB115 DP standard protocol sta-
tus, D-12
SMB186-SMB194 receive message control,
D-10
SMB2 freeport receive character, D-2
SMB28, SMB29 analog adjustment, D-5
SMB3 freeport parity error, D-2
SMB30, SMB130 freeport control registers,
10-126, D-6
SMB31 permanent memory (EEPROM)
write control, D-6
SMB34/SMB35 time interval registers, D-7
SMB36-SMB65 HSC register, D-8
SMB4 queue overflow, D-3
SMB5 I/O status, D-3
SMB6 CPU ID register, D-4
SMB66-SMB85 PTO/PWM registers, D-9
SMB7 reserved, D-4
SMB8-SMB21 I/O module ID and error reg-
isters, D-4
SMB86-SMB94 receive message control,
D-10
SMW222-SMW26 scan times, D-5
SMW32 permanent memory (EEPROM)
write control, D-6
S7-200 Programmable Controller System Manual
C79000-G7076-C230-02
Advertisement
Table of Contents
