Vrs Delayed Message For Department Group - NEC SL 1000 Programming Manual

ISSUE 1.0
Level
IN
Description
Use Program 22-15 : VRS Delayed Message for Department Group to define for each Department
(Extension) Group the timers, VRS message number and tone kind for VRS Delayed Message. There
are 32 available Department Groups.
Input Data
Item No.
01
02
03
04
05
06
07
Conditions
None
Feature Cross Reference
• Department Group
Programming Manual
Downloaded from www.Manualslib.com
Program 22 : Incoming Call Setup

22-15 : VRS Delayed Message for Department Group

Extension Group Number
Item
st
1 Delayed Message Start Time
Time before the VRS Delay Message is
played for Department Group.
st
1 Delayed Message Number
VRS message that is used for the 1st De-
layed Message.
st
1 Delayed Message Sending Count
This is the number of times the 1st Delay
Message is played. If set to 0, the 1st Delay
Message is not played.
nd
2 Delayed Message Number
VRS message that is used for the 2nd De-
layed Message.
nd
2 Delayed Message Sending Count
This is the number of times the 2nd Delay
Message is played. If set to 0, the 2nd Delay
Message is not played.
Tone Kind at Message Interval
What is heard between the Delay Message.
Disconnect Time After the End of VRS De-
layed Message
Time, after all 2nd Delay Messages are
played, before the caller is disconnected.
manuals search engine
01 ~ 32
Input Data
0 ~ 64800 seconds
0 ~ 101
0 = No Message
101 = Fixed Message
0~255 (time)
0 ~ 101
0 = No Message
101 = Fixed Message
0 ~ 255 (time)
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
0 ~ 64800 seconds
0 = No Disconnect
SL1000/SL1100
Program
22
Default
0
101
0
101
0
0
60
2-261