Dhcp Client Setting - NEC SL 1000 Programming Manual

SL1000/SL1100
Level
IN
Description
Use 10-63 : DHCP Client Setting to set the data of DHCP Client.
Program
Input Data
10
Item No.
01
Conditions
None
Feature Cross Reference
None
2-54
Downloaded from www.Manualslib.com
Program 10 : System Configuration Setup
Item
DHCP Client Mode
If you are using IP phones/trunks it is recom-
mended to not use the DHCP client function, a
static IP address would be preferred. If you are
going to still use the DHCP client function then the
DHCP server should be setup so that the same IP
address is always provided to the system.
When changing this program a system
reset is required.
manuals search engine

10-63 : DHCP Client Setting

Input Data Default
0 = Disabled 0
1 = Enabled
Program 10 : System Configuration Setup
ISSUE 1.0