SL1000/SL1100
Level
IN
Description
Program
Use Program 20-31 : Timer Class Timer Assignment to assign values to the timers on a class of
service basis.
20
Input Data
Item No.
01
02
03
04
05
06
07
08
2-198
Downloaded from
www.Manualslib.com
Program 20 : System Option Setup
20-31 : Timer Class Timer Assignment
Timer Class Number
Item
Trunk Queuing Callback Duration
Time
Trunk Queuing Callback rings an ex-
tension for this amount of time
Callback / Trunk Queuing Cancel
Time
The system cancels an extension
Callback or Trunk Queuing request
after this amount of time.
Virtual Extension Delay Interval
Virtual Extensions set for Delayed
Ringing (refer to
15-11 : Virtual Exten-
sion Delayed Ring Assignment) on
page 2-142
ring the extension after
this time.
Intercom Interdigits Time (Intercom
I/D Timer)
When placing Intercom calls, exten-
sion users must dial each digit in this
time.
Trunk Interdigits Time (Trunk I/D
Timer)
The system waits for this time to ex-
pire before placing the call in a talk
state (Call Timer starts after time ex-
pires, Voice Over and Barge-In are
not allowed until after time expires).
Hotline Time Start Time (Hotline
Start)
A Ringdown extension automatically
calls the programmed destination
after this time.
Ring No Answer Alarm Time
If a trunk rings a multiline telephone
longer than this time, the system
changes the ring cadence. This indi-
cates to the user that the call has
been ringing too long.
DIL/Incoming Ring Group No An-
swer Time
A DIL that rings its programmed desti-
nation longer than this time diverts to
the DIL No Answer Ring Group (set in
Program 22-08).
manuals search engine
Input Data
Default
0 ~ 64800 seconds
15 seconds
0 ~ 64800 seconds
64800 seconds
0 ~ 64800 seconds
10 seconds
0 ~ 64800 seconds
10 seconds
0 ~ 64800 seconds
10 seconds
0 ~ 64800 seconds
5 seconds
0 ~ 64800 seconds
60 seconds
0 ~ 64800 seconds
0 second
Program 20 : System Option Setup
ISSUE 1.0
0 ~ 15
Related Program
20-01-08
20-01-09
20-04-03
21-01-02
21-01-03
21-01-09
22-01-03
22-01-04