Firmware Update Time Setting - NEC SL 1000 Programming Manual

ISSUE 1.0
Level
IN
Description
Note: This program is available only via telephone programming and not through PC Programming.
Use Program 90-36 : Firmware Update Time Setting to define the data for the firmware update fea-
ture. This data is available to set from the PC Programming FW update feature.
The following firmware is available to update with this feature:
• main.bin
• Dspdbu.bin
• dsp.bin
• intradbu.bin is not supported
Input Data
Item No.
01
02
03
Sample Report
Update Success
Update Fail
Update Fail
Update Fail
Conditions
None
Feature Cross Reference
None
Programming Manual
Downloaded from www.Manualslib.com
Program 90 : Maintenance Program

90-36 : Firmware Update Time Setting

Item
Year : 0 ~ 99
Month : 0 ~ 12
Firmware Update Sched-
Day : 00 ~ 31
ule Time
Hour : 00 ~ 23
Minute : 00 ~ 59
Update mode 0 = Non Active
1 = Activated
Update Report Maximum 256
characters
Result
Update Success
Update is fail. Since 'A' drive is not available.
Update is fail. Since main up is not exist on A drive.
Update is fail. Since Time is expired.
manuals search engine
Input Data Default
0
0
0
0
0
0
-
Report Display
SL1000/SL1100
Description
Set the time to update the firmware
using a compact flash card.
Time registration fails if an expired
time is registered.
Activate the Firmware Update fea-
ture. If this setting is 1, new firmware
on the compact flash card updates
according to the setting at 90-36-01.
Output a report when the update is
executed and saves one copy on the
system. If a new update occurs, the
new report overwrites the old report.
Refer to the Sample Report on this
page shown.
2-551
Program
90