System Options For Multiline Telephones - NEC SL 1000 Programming Manual

SL1000/SL1100
Level
IN
Description
Program
Use Program 20-02 : System Options for Multiline Telephones to set various system options for
multiline telephones.
20
Input Data
Item
No.
01
02
03
04
05
06
2-156
Downloaded from www.Manualslib.com
Program 20 : System Option Setup

20-02 : System Options for Multiline Telephones

Item
Trunk Loop Key Opera- 0 = Keep Lamp
tion Mode 1 = Extinction
Mode
Incoming :
Talking :
Holding :
Trunk Group Access Key 0 = Outgoing / Incoming
Operating Mode 1 = Outgoing
Use this option to set the 2 = Incoming
operating mode of the ex-
tension trunk group keys.
The keys are for incoming
access, outgoing access,
or both.
BLF Control 0 = Idle / Busy (ON/OFF)
Set the conditions under 1 = Busy / Idle (ON/OFF)
which a Hotline, Reverse
Voice Over or DSS Con-
sole key indicates that an
extension is busy. Refer to
the Reverse Voice Over
feature for more informa-
tion.
Retrieve the Line After 0 = Not Holding (No Keep)
Transfer 1 = Holding (Keep)
Enable (1) or disable (0)
an extension ability to an-
swer a call after it has
been transferred, but be-
fore it is answered.
Headset Busy Mode 0 = No (Disable)
Set the conditions under 1 = Yes (Enable)
which a headset extension
is busy to incoming call-
ers.
Pre-selection Time 0 ~ 64800 seconds
When a multiline terminal
user preselects a line key,
the system remembers the
pre-selection for this time.
manuals search engine
Input Data
0 = Keep Lamp 1 = LED Off
300 IPM Red blink
Green Lighting LED Off
(on Talking TEL)
60 IPM Green LED Off
blink (on holding
TEL)
Program 20 : System Option Setup
ISSUE 1.0
Related
Default Note
Program
0
0
1 (SL1100)
0
0 20-09-07
5