Copy Program By Port Number - NEC SL 1000 Programming Manual

ISSUE 1.0
Level
IN
Description
Note: This program is available only via telephone programming and not through PC Programming.
Use Program 92-03 : Copy Program by Port Number to copy extension and the data of each out-
side line.
Input Data
Item No.
Refer to Program
Conditions
None
Feature Cross Reference
None
Programming Manual
Downloaded from www.Manualslib.com
Program Number
01 Source Number
Enter the port number from where the data is to be copied.
02 Destination Number (From)
Enter the first port number to where the information is to be cop-
ied
03 Destination Number (To)
Enter the last port number to where the information is to be cop-
ied. If the information is to be copied only to one port, enter the
information entered in the Destination Number (From) entry.
92-01 Copy Program on page 2-577
manuals search engine
Program 92 : Copy Program

92-03 : Copy Program by Port Number

Item
for program that can be copied.
SL1000/SL1100
XX-XX
Input Data
• For Trunk Base : Trunk Port Number
001 ~ 126 (SL1000) 001 ~ 096
(SL1100)
• For Trunk Group Base : Trunk
Group Number 01 ~ 25
• For Extension Number : 001 ~ 128
Including Virtual Extension : 01 ~ 50
• For Department Group Base : De-
partment Group Number 01 ~ 32
• For DSS : (DSS Console Number
01 ~ 12
2-581
Program
92