NEC SL 1000 Programming Manual page 367

ISSUE 1.0
Item No.
12
13
14
15
16
17
18
19
20
21
22
23
Conditions
None
Programming Manual
Downloaded from www.Manualslib.com
Item
DID Table Name Output
Determine if the DID table name should be dis-
played.
CLI Output When DID to Trunk
Determine if the CLI output should be displayed
for DID.
Date
Determine whether or not the date should be dis-
played on SMDR reports.
This option must be set to 0 if the
trunk name is set to be displayed in
Program 35-02-03.
CLI/DID Number Switching
Determine whether or not the CLI/DID Number
Switching should be displayed.
Trunk Name or Received Dialed Number
Determine how the SMDR should print incoming
calls on ANI/DNIS or DID trunks. If set to (1),
ANI/DNIS trunks can print DNIS digits. If set to
(0) trunk names are printed instead.
Print Account Code or Caller Name of Incom-
ing Call
Determine if SMDR should print Account Code or
Caller Name of Incoming Call.
Print Mode for Caller Name of Incoming Call
Determine how SMDR should print Caller Name
of Incoming Call.
Dialed Number Output Format
Determine if the dialed number should display
from the first digits or from the last digits. This
option is only available for outgoing calls.
External Information CFW Mode
Determine which information is displayed in the
"STATION" area for a transferred call when the
extension has Call Forward set with an Abbrevi-
ated Dial number as the destination. Selecting
"0" (Transfer Info) will display the extension num-
ber which called the extension with external Call
Forward set. Selecting "1" (Incoming Info) will
display the extension number which has the ex-
ternal Call Forward set.
This option only applies when Call Forward is set
using a service code (Programs 11-11-01 ~ 11-
11-07) and the destination uses an Abbreviated
Dial bin. It does not include Off-Premise or Cen-
trex transfers.
S-Point Terminal Number
Security Auto Dialing
Emergency call from Watch Mode. Define SMDR
output on/off. Output is SAD (Security auto dial-
ing).
Watch Auto Dialing
Emergency call from Remote Inspection. Define
SMDR output on/off. Output is WAD (Watch auto
dialing )
manuals search engine
SL1000/SL1100
Input Data
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = Not Displayed
1 = Displayed
0 = CLI (CLIP)
1 = DID Calling Number
2 = Calling Party Name
0 = Trunk Port Name
1 = Received Dialed Number
2 = Both
0 = ACC
1 = CNAME
0 = Normal
1 = Line Feed
0 = Display from the first digit
1 = Display from the last digit
0 = Transfer Information
1 = Incoming Information
0 = MSN Number
1 = Extension Number
0 = Not Output
1 = Output
0 = Not Output
1 = Output
Default
0
0
0
Program
35
0
0
0
0
0
0
0
1
1
2-345