Dr700 Server Information Setup - NEC SL 1000 Programming Manual

SL1000/SL1100
Level
IN
Description
Program
Use Program 10-46 : DR700 Server Information Setup to set up the information of DR700 Server.
10
Input Data
Item No.
01
04
06
07
08
09
10
11
12
13
2-44
Downloaded from www.Manualslib.com
Program 10 : System Configuration Setup

10-46 : DR700 Server Information Setup

Item
Register Mode
Normal:
When the phone boots up, it re-
ports the ext. assigned in the
phone or chooses the next avail-
able extension in the system.
Password is not required.
Auto:
If set to Auto, the SIP user name
and password must be entered on
the actual IP phone. These settings
must match 84-22/15-05-27, or the
phone does not come on-line.
Manual:
When the phone boots up, it
prompts user to enter a user ID
and password before logging in. It
checks this user ID/password
against 84-22/15-05-27. If there is
no match, the phone does not
come online.
Server Name
Assign the Server name to be used
in the SIP URL.
Register Port
Assign the port number in which
the SIP messages are sent to on
the VoIPDB.
This same port number must be
assigned in the SIP Multiline termi-
nals.
If this command is changed, it re-
quires a CPU reset.
Encryption Mode
Encryption Type
One Time Password
Start Port
Multicast IP Address
This sets the Multicast IP address
so that two or more main devices
don't overlap on the same network,
or if Multicast is used by other IP
services.
Multicast Port
Subscribe Session Port
manuals search engine
Input Data
0 = Normal
1 = Auto
2 = Manual
Up to 32 characters
0 ~ 65535
0 = Off
1 = On
0 = Mode 1
Up to 10 characters (0 ~ 9, , #)
*
1 ~ 128 (SL1000)
1 ~ 120 (SL1100)
224.0.0.0 ~ 239.255.255.255
0 ~ 65535
0 ~ 65535
Program 10 : System Configuration Setup
ISSUE 1.0
Default Related Program
0
sipphd
5080
0
0
None 10-46-07
1 10-46-01
224.0.0.10
30000
5081