Service Tone Timers - NEC SL 1000 Programming Manual

ISSUE 1.0
Level
IN
Description
Use Program 20-18 : Service Tone Timers to set the values for the system service tone timers. Refer
to the following chart for a description of each option, its range and default setting.
Input Data
Item
No.
01
02
03
04
05
06
07
08
09
Conditions
None
Feature Cross Reference
• Distinctive Ringing, Tones, and Flash Patterns
Programming Manual
Downloaded from www.Manualslib.com
Program 20 : System Option Setup
Item Input Data
Extension Dial Tone Time 0 ~ 64800 seconds
Busy Tone Timer 0 ~ 64800 seconds
Congestion Tone 0 ~ 64800 seconds
Call Waiting Tone Timer 0 ~ 64800 seconds
Multiline Confirmation 0 ~ 64800 seconds
Tone
Interval of Call Waiting 0 ~ 64800 seconds
Tone
Intrusion Tone Repeat 0 ~ 64800 seconds
Time
Conference Tone Interval 0 ~ 64800 seconds
Warning Beep Tone Sig- 0 ~ 64800 seconds
naling Interval
manuals search engine

20-18 : Service Tone Timers

Default Description
30 After getting Intercom dial
tone, a telephone user has
this time to dial the first
digit of the Intercom call.
15
10 A Busy Tone when system
resources run short. (Such
as DTMF receiver re-
sources).
10 This option sets the time
between Call Waiting
tones. This timer also sets
the time between Off-Hook
Signaling alerts.
10
10
0 After a call is interrupted
(such as Barge-In, Voice
Mail Conversation Record-
ing, or Voice Over), the
system repeats the Intru-
sion Tone after this time.
Normally, you should enter
0 to disable this time.
0
60
SL1000/SL1100
Program
20
Related Pro-
gram
14-01-18
2-187