Trunk Group Routing - NEC SL 1000 Programming Manual

SL1000/SL1100
Level
IN
Description
Use Program 14-06 : Trunk Group Routing to set up an outbound routing table for the trunk groups
Program
you assigned in Program 14-05. When a user dial 9, the system routes their calls in the order (priority)
specified. For example, if a user dials 9 and all calls in the first group are busy, the system may route
14 the call to another group. Trunk Access Map programming (Programs 14-07) may limit this option. The
system contains 25 routing tables for trunk access. Each table has four priority orders for trunk access.
There are 25 available Trunk Group Numbers.
Example for setting:
With less than four trunk groups,
Route Number 1
For the above setting, if all the lines in trunk group 1 are busy, the system searches for an idle line in
trunk group 2.
With more than four trunk groups,
Route Number 1
Route Number 2
For the above setting, if all the lines in the trunk groups 1, 2 and 3 are busy, the system searches for
an idle line in trunk groups 4 and 5.
Input Data
Item No.
01
Default
• Route 1, Order Number 1 = 1 (Trunk Group 1).
• Order Numbers 2, 3, 4 = 0 (Not Specified).
• All Other Routes (2 ~ 25) and Order Numbers (1 ~ 4) = 0 (Not Specified).
Conditions
None
2-106
Downloaded from www.Manualslib.com
Program 14 : Trunk, Basic Setup
: Order 1 - Trunk Group 1
: Order 2 - Trunk Group 2
: Order 1 - Trunk Group 1
: Order 2 - Trunk Group 2
: Order 3 - Trunk Group 3
: Order 4 - 1002 (Jump To Route Number 2)
: Order 1 - Trunk Group 4
: Order 2 - Trunk Group 5
Route Table Number
Priority Order Num-
ber
1 ~ 4 0 = Not Set
001 ~ 025 = Trunk group No.
1001 ~ 1025 = 1000 + Route Table No.
manuals search engine

14-06 : Trunk Group Routing

001 ~ 025
Input Data
Program 14 : Trunk, Basic Setup
ISSUE 1.0
Related Program
14-01-07
14-05
15-01-02
21-02