Dtmf And Dial Tone Circuit Setup - NEC SL 1000 Programming Manual

SL1000/SL1100
Level
IN
Description
Use Program 10-09 : DTMF and Dial Tone Circuit Setup to allocate the circuits on the CPU for ei-
Program
ther DTMF receiving or dial tone detection. The CPU has 20 (SL1000) 16 (SL1100) circuits initially, and
an additional 16 circuits are added when a VMDB is installed. By Adding EXIFE system can have up to
10
132 (SL1000) 96 (SL1100). These are used as follows:
• Extension: DTMF receiver for single line telephone
• Trunk: DTMF receiver for analog trunks, dial tone & busy tone detection for analog trunks
Input Data
Item No.
Conditions
• CPU has 20 (SL1000) 16 (SL1100) Channel DSP resources (receivers) only for basic CPU Unit.
VMDB has additional 16 DSP resources which you can add to CPU. Addition to that EXIFE also
each has 32 DSP resource (receivers) only for expand unit
• In case of 0 (= Common) is selected, and if 14-02-10 (Caller ID receive ability) is set to "Yes", DSP
resources are always allocated to analog trunk only, not for analog extension. If 14-02-10 is set to
"No", the DSP resources can be used for both analog trunk and analog extension commonly.
Feature Cross Reference
• Caller ID
• Central Office Calls, Placing
• Direct Inward Dialing (DID)
• Direct Inward System Access (DISA)
2-16
Downloaded from www.Manualslib.com
Program 10 : System Configuration Setup

10-09 : DTMF and Dial Tone Circuit Setup

Circuit/Resource Number
Input Data
01 0 = Common Use
1 = Extension Only
2 = Trunk Only
manuals search engine
01 ~ 132 (SL1000)
01 ~ 96 (SL1100)
Default Setting
Resource 01 - 132 = 0 (Common) (SL1000)
Resource 01 - 20 are Basic resource (only use Basic Board)
(SL1000)
Resource 21 - 36 are vmdb resource (only use Basic Board)
(SL1000)
Resource 37 - 68 are EXIFE1 resource (only use Expansion 1)
(SL1000)
Resource 69 - 100 are EXIFE2 resource (only use Expansion 2)
(SL1000)
Resource 101 - 132 are EXIFE3 resource (only use Expansion 3)
(SL1000)
Resource 01 - 96 = 0 (Common) (SL1100)
Resource 01 - 16 are Baic resource (only use Basic Board) (SL1100)
Resource 17 - 32 are vmdb resource (only use Basic Board)
(SL1100)
Resource 33 - 64 are EXIFE1 resource (only use Expansion 1)
(SL1100)
Resource 65 - 96 are EXIFE2 resource (only use Expansion 2)
(SL1100)
Program 10 : System Configuration Setup
ISSUE 1.0