Quick Entry Map Table Of Contents - IBM RS/6000 44P 270 Service Manual

Quick Entry MAP Table of Contents

Problem Description
Service Actions
System Stops With an 8-Digit Number Displayed
System Stops With a 4-Digit Number Displayed
System Stops With a 3-Digit Number Displayed
System Stops or Hangs With Alternating Numbers Displayed in the
Operator Display Panel.
Display Problem (Distortion, Blurring, Etc.)
Power and Cooling Problems
Flashing 888 in Operator Panel Display
Other Symptoms or Problems
You Cannot Find the Symptom in this Table
Symptom
You have parts to exchange or a corrective
action to perform.
You need to verify that a part exchange or
corrective action corrected the problem.
You need to verify correct system operation.
The system stops with an 8-digit error code
displayed in the operator panel display or on
the console.
28
Service Guide
Action
Service Actions
1. Go to Chapter 9, "Removal and Replacement
2. Go to "MAP 410: Repair Checkout" in the
Go to "MAP 410: Repair Checkout" in the
RS/6000 and Eserver pSeries Diagnostics
Information for Multiple Bus Systems.
Go to "MAP 410: Repair Checkout" in the
RS/6000 and Eserver pSeries Diagnostics
Information for Multiple Bus Systems.
System Stops With A 8-Digit Number Displayed
Record the error code. Go to Chapter 5, "Error
Code to FRU Index", on page 93.
System Stops With A 4-Digit Number Displayed
Procedures", on page 223.
RS/6000 and Eserver pSeries Diagnostics
Information for Multiple Bus Systems.
Page No.
28
28
28
29
29
29
30
30
30
33