Step 1020-3; Step 1020-4 - IBM RS/6000 44P 270 Service Manual

Step 1020-3

Take the following actions:
1. Find the 8-digit error code in Chapter 5, "Error Code to FRU Index", on page 93.
Note: If the 8-digit error code is not listed in Chapter 5, "Error Code to FRU Index",
v Any supplemental service manual for the device
v The diagnostic problem report screen
v The Service Hints service aid
v The CEREADME file (by using the Service Hints service aid).
2. Perform the action listed.

Step 1020-4

1. Turn off, then turn on the system unit.
2. When the keyboard indicator appears, press the F1 key on a directly attached
keyboard or the 1 key on an ASCII terminal.
3. When the System Management Services appear, check the error log for any errors.
v Display error log under utilities.
v If an error is logged, check the time stamp.
v If the error was logged during the current boot attempt, record it.
v Look up the error in the Chapter 5, "Error Code to FRU Index", on page 93 and
v If no recent error is logged in the error log, go to "MAP 1540: Minimum
38
Service Guide
on page 93, look for it in the following:
Note: Service aids can be found in RS/6000 and Eserver pSeries Diagnostics
Information for Multiple Bus Systems.
perform the listed action.
Configuration" on page 50.