Configure Nth Boot Device - IBM RS/6000 44P 270 Service Manual

Configure Nth Boot Device

In the description below, Nth can be 1st, 2nd, 3rd, etc. depending on your choice on
the previous menu.
Options display a screen similar to the following:
Configure Nth Boot Device
===>
Type the device number of the device name that you want to select as the Nth boot
device. For example, if you entered this menu by selecting 4 on the previous menu
(configure 2nd boot device), then enter the number 3 based on the list shown above.
You are thus selecting the SCSI CD-ROM device to be the 2nd (Nth) device in the boot
sequence.
Device Current
Number Position
1 1
2 2
3 3
4 4
5 -
Device
Name
Diskette
10/100 Ethernet Adapter (Integrated)
SCSI CD-ROM id=1 (integrated)
SCSI 9100 MB Harddisk id=8 (integrated)
.------.
|X=Exit|
`------'
Chapter 8. System Management Services
213