IBM RS/6000 44P 270 Service Manual page 120

Table 3. Firmware Error Codes. (continued)
102
Service Guide
Error Code Description
25A80998 NVRAMRC script evaluation error
- command line execution error
25A80999 NVRAMRC script evaluation error
- stack unbalanced on completion.
Action / Possible Failing FRU
Execution of a command line within the
NVRAM configuration variable
"NVRAMRC" (script) resulted in a
"throw" being executed. This script can
be modified by the system firmware
SMS utilities, the operating system, PCI
adapter ROM code or utility, or an
operator (via the open firmware script
editing command "nvedit"). It may not
be possible to resolve the problem
without a detailed analysis of the
NVRAM script, current system
configuration, and device tree contents.
1. The problem can be caused by a
SCSI adapter, whose SCSI bus ID
has been changed from the default
setting, no longer appearing in the
system. This can be caused either
by removing adapter, or problem
with a SCSI adapter.
v Select the SCSI ID utility from the
SMS menu(s).
a. Verify the list of SCSI
controllers/adapters. If the list
is not correct, suspect a
problem with he adapter(s)
installed but not listed.
b. Select the option to SAVE the
configuration information.
c. Restart the system.
v If the problem persists, boot the
operating system and verify the
SCSI bus IDs of any
installed/available SCSI
controllers (change as
necessary), and restart the
system.
2. Contact your service support
representative for further assistance.
This is a firmware debug environment
error. There is no user action or FRU
replacement.