IBM RS/6000 44P 270 Service Manual page 178

Rs/6000 44p series
Hide thumbs Also See for RS/6000 44P 270:
Table of Contents

Advertisement

v Reboot/Restart Policy Setup Menu
Reboot describes bringing the system hardware back up from scratch, for example,
from a system reset or power-on. The reboot process ends when control passes to
the operating system loading (or initialization) process.
Restart describes activating the operating system after the system hardware
reinitialized. Restart must follow a successful reboot.
98. Return to Previous Menu
1>
– Number of reboot attempts If the server fails to successfully complete the boot
process, it attempts to reboot the number of times specified. Values equal to or
greater than 0 are valid. Only successive failed reboot attempts count, not reboots
that occur after a restart attempt. At restart, the counter is set to 0.
– Use OS-Defined restart policy lets the service processor react or not react the
same way as the operating system to major system faults by reading the setting
of the operating system parameter Automatically Restart/Reboot After a
System Crash. This parameter may or may not be defined, depending on the
operating system or its version and level. If the operating system automatic restart
setting is defined, then it can be set to respond to a major fault by restarting or by
not restarting. See your operating system documentation for details on setting up
operating system automatic restarts. The default value is Yes.
– Enable supplemental restart policy - The default setting is No. If set to Yes, the
service processor restarts the system when the system loses control as detected
by the service processor surveillance, and either:
- The Use OS-Defined restart policy is set to No
OR
- The Use OS-Defined restart policy is set to Yes, and the operating system
– Call-Out before restart If a restart is necessary due to a system fault, you can
enable the service processor to call out and report the event. This option can be
valuable if the number of these events becomes excessive, signalling a bigger
problem.
160
Service Guide
Reboot/Restart Policy Setup Menu
1. Number of reboot attempts:
Currently 3
2. Use OS-Defined restart policy?
Currently Yes
3. Enable supplemental restart policy?
Currently No
4. Call-Out before restart:
Currently Disabled
has NO automatic restart policy.
Refer to "Service Processor Reboot/Restart Recovery" on page 176.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7044-270

Table of Contents